Major International Pharmaceutical Company – Customized Vezin Sampler – Free-falling medicinal powder – 2020.
M&W JAWO Sampling was requested to design and manufacture a specially made Vezin sampler for collecting representative samples of very fine medicinal powder for laboratory purposes.
The solution should handle various quantities (lot sizes) and particle sizes (20-2000 microns).
Furthermore, the electrical design should enable the sampler to collect representative samples with a cut frequency and in quantities determined by the operator from the LCP or remotely from the DCS.
The sample is collected in a plastic bag or a sample bottle attached to the sample outlet.
Everything was engineered and manufactured in-house.
Operating conditions: Feed Rate: 2 kg/h – 30 kg/h
Lot Size: 1-1000kg
Equipment material: AISI 316 stainless steel.
Equipped with different (replacable) slid sizes and lose flanges that would allow connection to either a 4” or a 6” feed pipe.
Ambient Conditions: Indoor – clean environment.
Sampling requirements: Adjustable in terms of cut frequency, pitch velocity, slide opening and number of cuts.
M&W JAWO Sampling was requested to design and manufacture a specially made Vezin sampler for collecting representative samples of very fine medicinal powder for laboratory purposes.
The solution should handle various quantities (lot sizes) and particle sizes (20-2000 microns).
Furthermore, the electrical design should enable the sampler to collect representative samples with a cut frequency and in quantities determined by the operator from the LCP or remotely from the DCS.
The sample is collected in a plastic bag or a sample bottle attached to the sample outlet.
Everything was engineered and manufactured in-house.
Operating conditions: Feed Rate: 2 kg/h – 30 kg/h
Lot Size: 1-1000kg
Equipment material: AISI 316 stainless steel.
Equipped with different (replacable) slid sizes and lose flanges that would allow connection to either a 4” or a 6” feed pipe.
Ambient Conditions: Indoor – clean environment.
Sampling requirements: Adjustable in terms of cut frequency, pitch velocity, slide opening and number of cuts.